Flatmaster mini is a new 8 head 11 x 11 footprint variable speed unit for small areas

FM-17 Flatmaster for contractors!

A machine built from the ground up. It has a light compact design with improved torque for heavy loads. 8 grinding/polishing heads on a 16.5 X 16.5 CNC machined base.

Precision machined to within a few thousandths of an inch, the base holds the 8 shafts in perfect alignment assuring an incredibly flat polished surface.

Incorporating a "Velcro" hook and loop fastening system, allowing for easy change from one diamond grit to another.

The steel segmented turbo cup grinding pads all now have two steel lock dowels which anchor to the pads

	This eliminates the shear forces on the Velcro
	"Auto centering" for super smooth running with no vibration.

A "step-on-it" handle adjustment system allows for super easy height adjustment of the handle for different operators.

Perfect for grinding and polishing right up to a wall, easy removal of custom designed weights.

Swivel vacuum port for dry concrete grinding, port is industry standard 2 1/4" diameter.

The motor has a box added that incorporates a recessed male plug and a hour meter that lets you know how long the machine has been running on a certain job.

Built with the aid of the IRONCAD modeling program, every part is manufactured to tolerances no greater than a few thousandths on an inch. This can only be done using state of the art computer controlled laser cutting machines provided by Stollco industries, our exclusive manufacturer for all laser cut components.

Understand why it works

Profiled Features (click on pictures to get full view)

This close-up shows the back of the machine, The small yellow line on the left is the pressure water feed.

Built tank tough for years of production.

Built to combine 2 machines with a simple connector plate which attaches to the motor mount bolts. One person can easily operate both machines at once.

Weights are the same for this machine as well as the FM-12

A side view

Incoming voltage and motor amp draw gauges are standard on all machines.

Grinding Footprint:17 x 17 inches

Weight: 140 lbs.

(4) 45 lb. weights bring it to 320 lbs

2 HP: 220VAC running 600 rpm or 1000

Variable speed 5HP special order.

How do you get 220VAC? GO HERE!

Cast aluminum base cnc machined to super accurate tolerances with all U.S.A manufactured Gates belts and sprockets! Super quiet running with zero maintenance required! No lubrication, no belt tensioning!